TRANSITION NETWORKS Products In Stock and Lead Time Available. TRANSITION NETWORKS Replacement Spares and Upgrades.

TRANSITION NETWORKS

Founded in 1987 as Transition Engineering, the company's first products adapted coaxial cable to twisted-pair cables; connecting terminals to mainframe computers. The company was renamed Transition Networks, Inc. in 1995 and experienced continued rapid growth as its products evolved from general Ethernet networking equipment to a complete line of conversion technology solutions. In 1998, Transition Networks was purchased by Communication Systems, Inc. Today, Transition Networks, Inc. offers n

Featured Products:

Transition T1/E1 Media Converter - Media converter - fiber optic - RJ-45 - ST multi-mode - external - up to 1 miles - 850 nm

100BASE-FX 1300nm multimode (MT-RJ) (2 km)

100BASE-FX 1300nm multimode (SC) (2 km)

100BASE-FX 1300nm multimode (ST) (2 km)

Port 1: 100BASE-FX 1300nm multimode (MT-RJ) (2 km) Port 2: 100BASE-FX 1300nm multimode (MT-RJ) (2 km)

Port 1: 100BASE-FX 1300nm multimode (SC) (2 km) Port 2: 100BASE-FX 1300nm multimode (SC) (2 km)

All Products:

Part Number

Description

Make

Availability

Price

Quantity

Description:

Port 1: 100BASE-FX 1300nm multimode (ST) (2 km) Port 2: 100BASE-FX 1300nm multimode (ST) (2 km)

TRANSITION NETWORKS

Available

Available

Description:

AS400 Twinax Balun Replaces twinax cable with low-cost twisted pair. Connects workstation to 3X or AS/400 system in either a daisy chain or star type topology. RJ-11; Active pins 2&5

TRANSITION NETWORKS

Available

Available

Description:

AS400 Twinax Balun Replaces twinax cable with low-cost twisted pair. Connects workstation to 3X or AS/400 system in either a daisy chain or star type topology. RJ-11; Active pins 3&4

TRANSITION NETWORKS

Available

Available

Description:

3X/AS400 Twinax to RJ-11; Active pins 3&4; 2 in twinax tail

TRANSITION NETWORKS

Available

Available

Description:

AS400 Twinax Balun Replaces twinax cable with low-cost twisted pair. Connects workstation to 3X or AS/400 system in either a daisy chain or star type topology. RJ-11; Active pins 4&3

TRANSITION NETWORKS

Available

Available

Description:

AS400 Twinax Balun Replaces twinax cable with low-cost twisted pair. Connects workstation to 3X or AS/400 system in either a daisy chain or star type topology. RJ-11; Active pins 4&3; 2 in. twinax tail

TRANSITION NETWORKS

Available

Available

Description:

AS400 Twinax Balun Replaces twinax cable with low-cost twisted pair. Connects workstation to 3X or AS/400 system in either a daisy chain or star type topology. RJ-45; Active pins 1&2

TRANSITION NETWORKS

Available

Available

Description:

AS400 Twinax Balun Replaces twinax cable with low-cost twisted pair. Connects workstation to 3X or AS/400 system in either a daisy chain or star type topology. RJ-45; Active pins 4&5

TRANSITION NETWORKS

Available

Available

Description:

AS400 Twinax Balun Replaces twinax cable with low-cost twisted pair. Connects workstation to 3X or AS/400 system in either a daisy chain or star type topology. RJ-45; Active pins 5&4

TRANSITION NETWORKS

Available

Available

Description:

Transition networks ICS-45-100T-C Impedance Matching Devices Fast Ethernet IBM Type 1 (150 ohm)

TRANSITION NETWORKS

Available

Available

Description:

IBM® 3270 Coax Baluns RJ-11; Active pins 3&4 Connect 3270 category "A" devices using unshielded twisted pair wiring. Maximum distance of 2,500 ft. (759 m)

TRANSITION NETWORKS

Available

Available

Description:

IBM® 3270 Coax Baluns RJ-11; Active pins 4&3 Connect 3270 category "A" devices using unshielded twisted pair wiring. Maximum distance of 2,500 ft. (759 m)

TRANSITION NETWORKS

Available

Available

Description:

IBM 3270 Coax BNC to RJ-11; Active pins 4&3; 6 inch coax tail

TRANSITION NETWORKS

Available

Available

Description:

IBM 3270 Coax BNC to RJ-45; Active pins 1&2; no tail

TRANSITION NETWORKS

Available

Available

Description:

IBM 3270 Coax BNC to RJ-45; Active pins 2&1; no tail

TRANSITION NETWORKS

Available

Available

Description:

IBM 3270 Coax BNC to RJ-45; Active pins 4&5; no tail

TRANSITION NETWORKS

Available

Available

Description:

IBM 3270 Coax BNC to RJ-45; Active pins 5&4; no tail

TRANSITION NETWORKS

Available

Available

Description:

IBM 3270 Coax BNC to RJ-45; Active pins 5&4; 6 in coax tail

TRANSITION NETWORKS

Available

Available

Description:

TokenMod™ Adapter (Functionally equivalent to AMP 555414-2) Type 1 to RJ-45; Active pins 3,4,5,6 Converts a Type 1 data connector to an RJ-45 connection. Can be used to convert devices (like IBM 8228) to UTP.

TRANSITION NETWORKS

Available

Available

Description:

TokenMod™ Adapter (Functionally equivalent to Nevada Western 037-040-35-07) Type 1 to RJ-45; Active pins 3,4,5,6 Converts a Type 1 data connector to an RJ-45 connection. Can be used to convert devices (like IBM 8228) to UTP.

TRANSITION NETWORKS

Available

Available

Description:

1000BASE-SX 850nm multimode (SC) 500 m (50/125 nm) 220 m (62.5/125 nm) Laser Class 1 Product Compliant with 802.3z 1000BASE-SX; 1000BASE-LX Plug-and-Play module Hot-swappable TTL Logic Interface

TRANSITION NETWORKS

Available

Available

Description:

1000BASE-LX 1310nm single mode (SC) [10 km / 6.2 miles] Laser Class 1 Product Compliant with 802.3z 1000BASE-SX; 1000BASE-LX Plug-and-Play module Hot-swappable TTL Logic Interface

TRANSITION NETWORKS

Available

Available

Description:

Port 1: 10BASE5 (AUI) Port 2: 10BASE-FL 850nm MM ST (2 km) Available in both multimode and single mode fiber optic versions. LinkAlert Technology Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management, requiring unnecessary time devoted to troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management. Multimode version can support fiber optic segments up to 2,000 meters. Single mode version supports segments up to 15,000 meters in length. Both multimode and single mode transceivers connect AUI male (DB-15) nodes to a fiber optic medium via a standard ST type connector in both full and half-duplex modes. The ability to operate in full-duplex mode allows for operation between switches, routers and servers using full-duplex Ethernet. Multimode version takes advantage of full duplex transmission to increase data rates between devices up to 20 Mbps. Long-Haul version, E-FRL-MC05(L), uses a 1300nm LED rather than the standard 850nm LED, so it can transmit and receive data over distances up to 5,000 meters. That's almost a 3,000-meter advantage over the standard 10BASE-FL distance of 2,000 meters.

TRANSITION NETWORKS

Available

Available

Description:

TRANSITION NETWORKS

Available

Available

Description:

Port 1: 10BASE5 (AUI) Port 2: 10BASE-FL 850nm MM SC (2 km) Available in both multimode and single mode fiber optic versions. LinkAlert Technology Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management, requiring unnecessary time devoted to troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management. Multimode version can support fiber optic segments up to 2,000 meters. Single mode version supports segments up to 15,000 meters in length. Both multimode and single mode transceivers connect AUI male (DB-15) nodes to a fiber optic medium via a standard ST type connector in both full and half-duplex modes. The ability to operate in full-duplex mode allows for operation between switches, routers and servers using full-duplex Ethernet. Multimode version takes advantage of full duplex transmission to increase data rates between devices up to 20 Mbps. Long-Haul version, E-FRL-MC05(L), uses a 1300nm LED rather than the standard 850nm LED, so it can transmit and receive data over distances up to 5,000 meters. That's almost a 3,000-meter advantage over the standard 10BASE-FL distance of 2,000 meters.

TRANSITION NETWORKS

Available

Available

Description:

Port 1: 10BASE5 (AUI) Port 2: 10BASE-FL 1300nm SM ST (20 km) Available in both multimode and single mode fiber optic versions. LinkAlert Technology Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management, requiring unnecessary time devoted to troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management. Multimode version can support fiber optic segments up to 2,000 meters. Single mode version supports segments up to 15,000 meters in length. Both multimode and single mode transceivers connect AUI male (DB-15) nodes to a fiber optic medium via a standard ST type connector in both full and half-duplex modes. The ability to operate in full-duplex mode allows for operation between switches, routers and servers using full-duplex Ethernet. Multimode version takes advantage of full duplex transmission to increase data rates between devices up to 20 Mbps. Long-Haul version, E-FRL-MC05(L), uses a 1300nm LED rather than the standard 850nm LED, so it can transmit and receive data over distances up to 5,000 meters. That's almost a 3,000-meter advantage over the standard 10BASE-FL distance of 2,000 meters.

TRANSITION NETWORKS

Available

Available

Description:

Transition Networks E-TBT-MC02 Transceiver. Ethernet AUI to 10BASE-T (RJ-45) | Supports data transfer rate of 10 Mbps | 10.2-15.75 Input Voltage | 250mA@12VDC (Typ) Input Current

TRANSITION NETWORKS

Available

Available

Description:

Ethernet AUI to Coax (BNC)

TRANSITION NETWORKS

Available

Available

Description:

Fast Ethernet MII to 100BASE-FX 1300nm multimode (ST) (2 km)

TRANSITION NETWORKS

Available

Available

Description:

Full/Half-Duplex 100BASE-FX Transceiver Port 1: MII Port 2: 100BASE-FX 1300nm MM SC (2 km) Connects MII nodes via an ST or SC type connector, to a fiber optic medium in both full and half-duplex modes. (The ability to operate in full-duplex mode allows for operation between switches and routers using full-duplex Fast Ethernet.) Support fiber optic segments up to 2,000 meters on multimode fiber. Single mode version supports fiber optic segments up to 20,000 meters.

TRANSITION NETWORKS

Available

Available

Description:

Full/Half-Duplex 100BASE-FX Transceiver Port 1: MII Port 2: 100BASE-FX 1300nm SM SC (20 km) Connects MII nodes via an ST or SC type connector, to a fiber optic medium in both full and half-duplex modes. (The ability to operate in full-duplex mode allows for operation between switches and routers using full-duplex Fast Ethernet.) Support fiber optic segments up to 2,000 meters on multimode fiber. Single mode version supports fiber optic segments up to 20,000 meters.

TRANSITION NETWORKS

Available

Available

Description:

Fast Ethernet MII to 100BASE-TX (RJ-45)

TRANSITION NETWORKS

Available

Available

Description:

PowerStar III; 1 host/7 device; RJ-45 for host & devices

TRANSITION NETWORKS

Available

Available

Description:

PowerStar IV AS400 14-port Active UTP Repeater (2) RJ-45 ports for host connection (14)RJ-45 ports for device conections (1) slot for optional twinax or fiber adapter card Connects two hosts and 14 devices in a star configuration via twisted pair cable at a total distance of up to 1520 meters (5,000 feet) from the host. Provides true start sequence regeneration and line synchronization. Each port has separate transceiver circuitry and is isolated from the other ports, so disconnecting or removing one device does not affect the other devices. Automatically compensates for speed differences among 5250 devices. Expansion slot and Slide-In-Cards (SICs) let you extend network distances even further. An optional modular Twinax SIC extends the total distance from the controller to each workstation to 1520 meters. Or the optional Fiber Optic SIC extends that distance to 3,000 meters.

TRANSITION NETWORKS

Available

Available

Description:

PowerStar™ Express Mux 5250 Express 8-port Multiplexer / Demultiplexer (8) RJ-45 ports for device connections (1) DB-25 for host connection (1) Fiber Optic (ST) IBM® 5250 Express capable. Compatible with PowerStar III, PowerStar IV and PowerStar V active star repeaters. (It will operate at 2Mbps 5250 Express speed when used with the PowerStar V.) Increase your data integrity with true start sequence regeneration and line synchronization. Simplify your media connections by using a single direct cable connection to the AS/400 to multiplex eight controller ports. Supports split polling in 5250 Express mode.

TRANSITION NETWORKS

Available

Available

Description:

Ethernet 4 and 8-port Fiber Hubs 4-port 10BASE-FL multimode fiber (ST) hub Designed to support anything from a workgroup to an entire network. 4 and 8 10BASE-FL port models can be cascaded for extended LAN topologies. Link Pass Through Optional AUI port provides connectivity to existing backbone. Alphanumeric display and advanced diagnostics simplify hub configuration, status monitoring and troubleshooting.

TRANSITION NETWORKS

Available

Available

Description:

Ethernet 4 and 8-port Fiber Hubs 8-port 10BASE-FL multimode fiber (ST) hub Designed to support anything from a workgroup to an entire network. 4 and 8 10BASE-FL port models can be cascaded for extended LAN topologies. Link Pass Through Optional AUI port provides connectivity to existing backbone. Alphanumeric display and advanced diagnostics simplify hub configuration, status monitoring and troubleshooting.

TRANSITION NETWORKS

Available

Available

Description:

BNC adapter card for 10BASE-FL fiber hubs

TRANSITION NETWORKS

Available

Available

Description:

(ST) fiber adapter card for 10BASE-FL fiber hubs

TRANSITION NETWORKS

Available

Available

Description:

8-port Unmanaged Fast Ethernet Fiber Hub 8-port 100BASE-FX multimode fiber (ST) hub (206 m) Stackable—up to 5 units—with a slot for option module. Front panel LED indicators for power, collision, fault, status, and activity. Incorporate 100Mbps FX multimode fiber into existing UTP environment. Uses standard-based technology that provides ten times the speed and performance of an existing 10Mbps network. Plug and play installation-there are no DIP switches to set or software to load.

TRANSITION NETWORKS

Available

Available

E-FX-HB-0800(SC)

Description:

8-port Unmanaged Fast Ethernet Fiber Hub 8-port 100BASE-FX multimode fiber (SC) hub (206 m) Stackable—up to 5 units—with a slot for option module. Front panel LED indicators for power, collision, fault, status, and activity. Incorporate 100Mbps FX multimode fiber into existing UTP environment. Uses standard-based technology that provides ten times the speed and performance of an existing 10Mbps network. Plug and play installation-there are no DIP switches to set or software to load.

TRANSITION NETWORKS

Available

Available

Description:

100BASE-FX multimode adapter (SC)

TRANSITION NETWORKS

Available

Available

Description:

100BASE-FX multimode adapter (ST)

TRANSITION NETWORKS

Available

Available

Description:

100BASE-TX adapter RJ-45

TRANSITION NETWORKS

Available

Available

« first previous Page 1 of 84. next last »

Disclaimer

Industrial Partner is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.